US? 2HSS86 hybrid servo driver & nema34 Stepper Motor Closed loop 4.5N. M 82mm 6A

HSS86 hybrid servo driver & nema34 Stepper Motor Closed loop 4.5N. M 82mm 6A For CNC Router Milling Engraving Machine. M Closed-loop servo motor (82mm, 6A, 200KHz).

1 x 3M Extension cable. M Closed Loop Servo Stepper Motor & 2HSS86 Servo Driver CNC Kit. 1 x 86HSE82 Nema34 4.5N.

M Closed-loop servo motor 86x86x82mm. 1 x 2HSS86 Servo driver. 1 x 3M Extension cord. English user manual will send by message. This is the nema 34 series hybrid stepper servo kit.

The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed.

The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely.

The closed loop system is an ideal improvement and a good replacement of open loop system, besides that, it also have some function of AC servo motors. Nema34 Closed loop servo motor 4.5N. Step Angle(degrees):1.8 degree.

Insulation resistance:100MOhm(500V DC). Voltage range: AC24-70V or DC30-100V. Peak current :Peak 8.0A. Suitable motor:86HSE156,86HSE118, 86HSE82.

1.2.1 Stepper motor closed loop system, never lose step. 1.2.2 Improve motor output torque and working speed. 1.2.3 Automatic current adjustment based on load. 1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter. 1.2.5 Drive nema 34 series closed loop stepper motor.

1.2.6 Pulses response frequency can reach 200KHZ. 1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev. Over-current, over-voltage and position ultra difference protection function. Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.

Item must be in it's original condition and no physical damage. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "powace08" and is located in this country: US.

This item can be shipped to United States, Poland, Ireland, Netherlands, Slovakia, Slovenia, Sweden, Belgium, Israel, Italy, Switzerland, China, Republic of Croatia, Portugal, Australia, Austria, Bulgaria, Czech Republic, Greece, United Kingdom, Hungary, France, Denmark, Spain, South Korea, Hong Kong, Canada, Romania, Mexico, Serbia, Saudi Arabia, Japan, Lithuania, Finland, Luxembourg, Germany, Latvia.

Size: 86x86x82mm
Driver: HSS86 2-Phase Hybrid Stepper Servo Driver
Lead wire: 4pcs
Insulation Class: B
Holding Torque: 4.5N.m
Step Angle(degrees): 1.8
Brand: RATTM MOTOR
Type: Hybrid
Model: 85HSE4N/HSS86
Frequency: 0~200KHz
Country/Region of Manufacture: China
Current: 6A