Promotion&4Axis NEMA23 Closed Loop Motor 4A 425oz.in&Servo Driver Free Ship

  

4PC NEMA 23 Closed-Loop Stepper motor 2.8N. M Shaft Diameter 8mm +3m cable. 4pc Closed-Loop Stepper Drive HBS57.

2pc Power supply 350W-36vdc/9.7A. 1 pc breakout board&1 pc parallel cable. NEMA 23 Closed-Loop Stepper motor.

NEMA 23 Closed-Loop Stepper motor driver HBS57. HBS series provides the requirements for high performance and reliability, when the servo is the only alternative to the selected application while it is still cost-effective. The system includes a two-phase stepper motor all-digital, high-performance drive, which is used to close the real-time position, velocity and current loop servo system as internal encoder combined.

It combines servo and stepper motor technology, and both offer unique capabilities and enhancements, but at a fraction of the cost of a servo system. Its quick response and great features make it ideal for hunting does not apply, such as bonding and visual systems, including a short distance fast motion is required, hunting will be a problem. It is an ideal application by belt or other mechanism has a low rigidity and you do not want it to vibrate when parking. Without losing step, High accuracy in positioning 100% rated output torque. Variable current control technology, High current efficiency Small vibration, Smooth and reliable moving at low speed Accelerate and decelerate control inside, Great improvement in.

Smoothness of starting or stopping the motor. Compatible with 1000 and 2500 lines encoder.

No adjustment in general applications. Over current, over voltage and over position error protection. Green light means running while red light means protection or offline.

The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping. The power is 350Watts, and the output voltage is 36VDC.

Built in DB25 male connector. DB25 Output Pin:P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17. DB25 Input Pin: P10, P11, P12, P13, P15.

High quality with Surface-mount Tech. P2 P3 is set to X-axis for the X-axis pulse. P4 P5 is set to Y-axis, Y axis pulse.

P6 P7 is set to Z-axis Z-axis pulse. The other can be set to A B C axis. A-axis pulse P8 P9 is set as the A axis. P14 is set to B-axis B-axis pulse P1. P16 P17 is set to C-axis, C axis pulse.

Can also be set to the spindle control signal \ electrical permit. Input interface for the P10 P11 P12 P13 P15.

If the order receive address at United Kingdom, we need cancel order. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors".

The seller is "longsmotor99" and is located in this country: DK. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• Full Load Amps: 4A
• MPN: C012974A2776
• Full Step Angle: 1.8° (200 Steps)
• Holding Torque: 425 oz.

  in

• Brand: LONGS MOTOR