New Motor Driver Controller 2HSS57 with Closed-loop Stepper Motor Nema23. The 2HSS57 hybrid stepping servo drive system is perfectly integrated into the servo control technology in the digital stepping drive. The product adopts the typical three-loop control method (position loop, speed loop and current loop), which is compatible with the advantages of stepping and servo. Drive a two-phase hybrid stepper motor.
It is a very cost-effective motion control product. Full-closed control, the motor is equipped with 1000 line, close to 100% output, subdivision setting range is 2-256, high speed response, high speed.Optical isolation fault alarm output interface ALM, current loop (-3dB) 2KHz (typical), speed loop broadband 500Hz (typical). Position loop broadband 200Hz (typical), can be downloaded or changed parameters with RS232 serial communication. Overcurrent,, overvoltage, undervoltage, overheating, overspeed, out of tolerance protection. Please pay what you win in 7 days. Because the unpaid dispute will not be closed automatically, and we may ignore it. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We are committed to give you the best customer service possible.
Please let us work on the issues. We'd like to settle any problem in a friendly manner.
Due to the difference of time zone between Hong Kong and your location, sometimes the answer will be delayed. It's just take you 1 minute. People always bought together with.