Nema 86 Stepper Motor & DM542 Driver High Torque 4.5N 2-Phase 4A 150mm BYG250B. Rotational speed: the torque drops at more than 200 revolutions per minute, 500-600 revolutions. Body length: 80mm Output torque: 4Nm. Shaft diameter: 14MM keyway 5MM shaft output mode: single shaft. Motor current: 4A Motor temperature resistance: below 85 degrees.
Outlet mode: two-phase four-wire (red wire A+, green wire A+, yellow wire B+, blue wire B-). Drive parameter model: DM542S economical version. Pulse signal: 3.3V/5V/24V compatible. Microsteps are subdivided into 14 kinds, the number of steps is 25600 steps/revolution; the current range is 2.0A-4.2A, with protection circuits such as half-current, over-voltage, and over-current.
Drive parameter model: DM542 standard version. Microsteps are subdivided into 16 types, the number of steps is 25600 steps/revolution; the current range is 1.0A-4.0A, with protection circuits such as half-current, over-voltage, and over-current. (Except some countries and APO/FPO). Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday.
We care about our valued buyers, if you have any questions, our customer service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails. And time zone difference, we may not be able to reply your emails immediately. Feedback is very important to us.
This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "meilianlu0" and is located in this country: CN. This item can be shipped worldwide.