86 stepper motor set parameters. Rotational speed: the torque drops at more than 200 revolutions per minute, 500-600 revolutions. Shaft diameter: 14MM keyway 5MM. Shaft output mode: single shaft. Motor temperature resistance: below 85 degrees.
Outlet mode: two-phase four-wire (red wire A+, green wire A+, yellow wire B+, blue wire B-). Pulse signal: 3.3V/5V/24V compatible. Input voltage: AC AC18V-60V, DC DC24V-80V. Microsteps are subdivided into 14 types, the number of steps is 25600 steps/revolution; the current range is 2.0A-7.2A, with protection circuits such as half-current, over-voltage, and over-current. The driver is AC and DC power supply, and the working range is AC18V-60V, and DC DC24V-80V. Using imported components, stable and durable, strong anti-interference, stable acceleration, high cost.Input voltage: AC AC18V-80V, DC DC24V-110V. Microsteps are subdivided into 16 types, the number of steps is 25600 steps/revolution; the current range is 2.0A-7.2A, with protection circuits such as half-current, over-voltage, and over-current. The driver is AC and DC power supply, and the working range is AC18V-80V, and DC DC24V-80V. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "taoliangsong888" and is located in this country: CN.
This item can be shipped worldwide.