Nema 23 Closed Loop Stepper Motor Set 3.6NM Torque HBS57 Driver 57HBS30 Motor 3N
Specification: Driver Model: HBS57 Voltage: DC24-60V Phase current: 5A/Pha (peak current) Subdivision: 2-256 subdivision Maximum 51200 steps / lap Processor: 32-bit DSP digital Pulse voltage: 5V-24V signal compatible Response frequency: up to 200KHz Pulse mode: single pulse (default) double pulse (software adjustable) Cooling method: natural cooling Motor Model: 57HBS30 Phase current: 4.0A/Pha Torque: 3.6Nm Shaft diameter: 8mm Shaft length: 21mm Step angle:1.8° Step angle accuracy: ±5% Surface temperature: 80? Or less (rated current) Motor line: 3m Encoder line: 3m. Nema 23 Closed Loop Stepper Motor Set 3.6NM Torque HBS57 Driver 57HBS30 Motor 3N. HBS57 adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system.
HBS57 is equipped with 42 and 57 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Phase current: 5A/Pha (peak current). Subdivision: 2-256 subdivision Maximum 51200 steps / lap.
Pulse voltage: 5V-24V signal compatible. Response frequency: up to 200KHz. Pulse mode: single pulse (default) double pulse (software adjustable). Feedback is very important to us. It is impossible to address issues if we do not know about them!
Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Creative Design, Durable Material, Beautiful Appearance. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors".
The seller is "zhuliyun-6" and is located in this country: GB. This item can be shipped to United Kingdom.
- * Feature *: Creative Design，Durable Material，Beautiful Appearance
- Brand: Unbranded
- Flange: Nema22 (57mm
- Model: HBS57+57HBS30
- Shaft Diameter: D8mm Shaft
- Holding Torque: 2Nm