Nema Stepper Motor

NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver

NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver
NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver

NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver    NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver

130 stepper motor set parameters: Motor model parameters: 130BYG350D Rotational speed: the torque drops at more than 200 revolutions per minute, 500-600 revolutions Body length: 280mm Output torque: 50Nm Output shaft diameter: 19MM/24MM Shaft output mode: below 85 degrees Outlet mode: three-phase three-wire (red wire connected to U, white wire connected to V, green wire connected to W) The internal enameled wire of the motor is all 180° high temperature resistant; it is higher than the 120° on the market. Low resistance, using n35sh magnetic steel; high temperature resistance; strong magnetic force.

Two: Drive parameters Drive parameter model: 3ND2283 Pulse signal: 3.3V/5V/24V compatible. No channel resistance Input voltage: AC (alternating current) 220V to adapt to harsh grid environment Microsteps are subdivided into 16 types, the number of steps is 30,000 steps/revolution; the current is 2.0A-10A, with protection circuits such as half-current, over-voltage, and over-current. The driver is AC and DC power supply, and the working range is 220VAC. Drive parameter model: HB3722S2 Pulse signal: 3.3V/5V/24V compatible, without channeling resistance Input voltage: AC (alternating current) 220V to adapt to harsh grid environment Microsteps are subdivided into 16 types, the number of steps is 60,000 steps/revolution; the current is 1.2A-7A, with protection circuits such as half-current, over-voltage, and over-current.

The drive is AC power supply and its working range is 220VAC. 1 set of 130 stepping motor set includes: 1 driver, 1 motor, 1 motor cable 3 meters. You can contact customer service to modify the price according to the receiving place.

This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "taoliangsong888" and is located in this country: CN. This item can be shipped worldwide.

  • Motor & Driver: 35N+HB3722S2
  • Shaft Diameters: 19MM
  • Brand: Unbranded
  • Country/Region of Manufacture: China
  • Current Type: AC
  • Nominal Rated Input Voltage: 220 V
  • IP Rating: IP05


NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver    NEMA52 130mm Stepper Motor Set 24N 28N 35N 50N High Torque Microstep Driver