Nema34 12NM DSP Closed Loop Stepper Motor Hybrid Servo Drive Kit for CNC Routers
Nema34 12NM DSP Closed Loop Stepper Motor Hybrid Servo Drive Kit for CNC Routers. HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system.
Phase current: 8A/Pha (peak current). Subdivision: 2-256 subdivision Maximum 51200 steps / lap. Pulse voltage: 5V-24V signal compatible.
Response frequency: up to 200KHz. Pulse mode: single pulse (default) double pulse (software adjustable). Shaft length: 40mm Step angle;:1.8° Step angle accuracy: ±5%.
Surface temperature: 80 or less (rated current). Feedback is very important to us.
It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "autopartstop666" and is located in this country: DE.
This item can be shipped to all countries in Europe.
- * Feature *: Creative Design，Durable Material，Beautiful Appearance
- Driver Model: HBS86H
- Voltage: AC20-80V/DC24-100V
- Phase current: 8A/Pha (peak current)
- Subdivision: 2-256 subdivision Maximum 51200 steps / lap
- Processor: 32-bit DSP digital
- Pulse voltage: 5V-24V signal compatible
- Response frequency: up to 200KHz
- Pulse mode: single pulse (default) double pulse (software adjustable)
- Cooling method: fan cooling
- Motor Model: 86HBS120
- Phase current 1: 5.6A/Pha
- Torque: 12N.
- Shaft Diameter: 14mm
- Shaft length: 40mm
- Step angle: 1.8°
- Step angle accuracy: ±5%
- Surface temperature: 80℃ or less (rated current
- Motor line: 3m
- Encoder line: 3m
- Brand: Unbranded