Nema34 12NM DSP Closed Loop Stepper Motor Hybrid Servo Drive Kit for CNC Kit

  
HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system.

HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Phase current: 8A/Pha (peak current). Subdivision: 2-256 subdivision Maximum 51200 steps / lap. Pulse voltage: 5V-24V signal compatible.

Response frequency: up to 200KHz. Pulse mode: single pulse (default) double pulse (software adjustable). Shaft length: 40mm Step angle;:1.8° Step angle accuracy: ±5%. Surface temperature: 80 or less (rated current).