MACH3 USB 3Axis CNC Kit TB6560 Stepper Motor Driver Board+Nema23 Stepper Motor57
MACH3 USB 3-Axis CNC Kit TB6560 Stepper Motor Driver Board + 3pcs Nema23 Stepper Motor57+1pc Power Package Content: - 3 x Nema 23 Stepper Motors 57 - 1 x USB MACH3 CNC 3 axis TB6560 Stepper Motor Driver Board - 1 x Power - 1 x USB cable - 1 x CD Motor Controller: - USB mach3 CNC 3 axis TB6560 Stepper Motor Driver Board - Motor type: Stepper Motor - Model Number: mach3 USB 3 axis - Frequency: 100KHZ Features: 1. Support for 3-axis linkage, you can connect four stepper motor drives or servo drives.
Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor. 3 general-purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch, home switch etc. Support for connecting electronic handwheel.
Have 0-10V signal output, you can use mach3 software to control the spindle motor speed. 3 general-purpose isolated relay drive output interface, can drive three relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device; 8.1 status LED, indicate connection status on the board. Resolution 1, 12, 18, 116 micro stepping output. Four (or three) channels 3.5A adjustable output current for 2/4 phase bipolar stepper driver. Build with 4 outputs and 5 inputs.
Nema 23 Stepper Motor 57: - Step Angle (degrees): 1.8 deg. Holding Torque: 1.8Nm - Phase: 2 - Current / Phase: 4 - Size: 575776. Usually it cost about 35USD-50USD.
This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "thanksbuyer-hobby" and is located in this country: CN.
This item can be shipped worldwide.- Brand: Unbranded
- Motor type: Stepper Motor
- Model Number: mach3 USB 3 axis
- Frequency: 100KHZ