For European Union Customers, It will be more faster to receive this parcel. 3PC NEMA 23 Closed-Loop Stepper motor 2.8N. M Shaft Diameter 8mm +3m cable. 3pc Closed-Loop Stepper Drive HBS57.
1pc Power supply 350W-36vdc/9.7A. 1 pc breakout board&1 pc parallel cable. NEMA 23 Closed-Loop Stepper motor. NEMA 23 Closed-Loop Stepper motor driver HBS57. The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective.
Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping.
The power is 350Watts, and the output voltage is 36VDC. Built in DB25 male connector.
DB25 Output Pin:P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17. DB25 Input Pin: P10, P11, P12, P13, P15. High quality with Surface-mount Tech. P2 P3 is set to X-axis for the X-axis pulse.P4 P5 is set to Y-axis, Y axis pulse. P6 P7 is set to Z-axis Z-axis pulse. The other can be set to A B C axis. A-axis pulse P8 P9 is set as the A axis. P14 is set to B-axis B-axis pulse P1. P16 P17 is set to C-axis, C axis pulse. Can also be set to the spindle control signal \ electrical permit.
Input interface for the P10 P11 P12 P13 P15. If the order receive address at United Kingdom, we need cancel order. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "longsmotor99" and is located in this country: DK. This item can be shipped worldwide.