1 x 86HSE116 closed Loop Servo motor 8N. 1 x 3 m Extension wire. HSS86 2-Phase Hybrid Stepper Servo Driver. HSS86 is 2 phase nema 34 series hybrid stepper servo driver.
It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent.Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control.
The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo.
2.2.1 Stepper motor closed loop system, never lose step. 2.2.2 Improve motor output torque and working speed. 2.2.3 Automatic current adjustment based on load, lower temperature rising. 2.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter. 2.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.2.2.6 No vibration from high speed to zero speed. 2.2.7 Drive nema 34 series closed loop stepper motor. 2.2.8 Pulses response frequency can reach 200KHZ.
2.2.9 16 kinds microsteps choice, highest 51200microsteps/rev. 2.2.10 Voltage range: AC2470V or DC30V100V. 2.2.11 Over-current, over-voltage and position ultra difference protection function. Peak 8.0A (current change according to load). Closed loop stepper system can be applied to all kinds small automatic equipment and instrument.Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, laser phototypesetting, graph plotter, cnc machine, automatic assembly equipment and so on. Double check your address when you order after, We are not responsible for wrong or undeliverable address. If the order is during the weekends, it will be take extra 2 days longer. We care about our valued customers, and will always try to help you, hope to establish long business with you.
Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have, and will try our best to resolve the issues. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. We will help you to solve all problems. Customer's satisfaction is very important to us.CNC Nema 34 Closed Loop Servo Motor 8.5N. M & Hybrid 8A Driver CNC Kit? Name34 Closed Loop Servo Motor kit 8.5 N. M& Hybrid Driver 8A & CNC Kit? Name34 Closed Loop 8.5N.
M Servo Motor & HSS866 Hybrid Driver CNC Kit? M Closed Loop Servo Motor & HSS866 Hybrid Driver CNC Kit? Nema34 Closed Loop Servo Motor 8.5 N.M kit&Hybrid HSS86 Driver CNC Kit? M& Hybrid HSS86/ 8A Driver CNC Kit?
M & Hybrid HSS86 Driver CNC Kit? M Closed Loop Servo Motor & Hybrid HSS86 Driver CNC Kit [EU stock] Nema34 Closed Loop 8N.M Servo Motor & Hybrid HSS86 Driver CNC Kit EU Nema34 Closed Loop 8N. M Servo Motor & Hybrid HSS86 AC and DC Driver CNC Kit [EU stock] Nema34 Closed Loop Servo Motor 8N.
M & Hybrid HSS866 Driver CNC Kit? M Closed Loop Servo Motor kit&Hybrid HSS86 Driver CNC Kit? M Servo Motor Closed Loop 116mm+HSS86 Hybrid Driver CNC Kit?M Nema34 Servo Motor Closed Loop 116mm CNC Kit+HSS86 Hybrid Driver? M Servo Motor Closed Loop 116mm 6A+HSS86 Hybrid Servo Driver? M Servo Motor Closed Loop 116mm 6A+2HSS86H Driver CNC Kit? M Closed Loop Servo Motor 116mm+HSS86 Hybrid Driver CNC Kit? M Hybrid Servo Motor 116mm+HSS86 Driver CNC Kit EU Closed Loop Stepper Servo Motor NEMA34 8N.
M 116mm&6A HSS86H Driver AC CNC Kit EU 8N. M Closed Loop Nema34 Servo Motor 116mm 6A & 100VDC HSS86 Driver AC CNC Kit [EU] Nema34 8N. M Closed Loop Servo Motor 116mm 6A & HSS86 Hybrid Driver CNC Kit? M 116mm Servo Motor Closed Loop+HSS86 Hybrid Driver CNC Kit? M Servo Motor Closed Loop+HSS86 Hybrid Driver 8A CNC Kit Nema34 8N.
M Closed Loop Stepper Servo Motor 116mm & HSS86 Driver 8A CNC Kit? M Closed Loop Servo Motor 6A & Hybrid HSS86H Driver CNC Kit? M Closed Loop Servo Motor Nema34 116mm 6A&HSS86 Hybrid Driver CNC? M Closed Loop Stepper Servo Motor 116mm 6A & HSS86 Driver CNC Kit? M Servo Motor Closed Loop 116mm 6A & HSS86 Hybrid Driver CNC Kit?
M Closed Loop Nema34 Servo Motor 116mm 6A & HSS86 Driver DC CNC Kit? M Closed Loop Servo Motor 116mm & HSS86 2-phase Driver CNC Kit. M Closed Loop Servo Motor 116mm+HSS86 Driver 6A DC CNC Kit. M Closed Loop Servo Motor 116mm & HSS86 2-Phase Driver CNC Kit.
M Closed Loop Servo Motor 116mm + Hybrid HSS86 Driver CNC kit. M 116mm Closed Loop CNC Servo Motor 6A+HSS86 Hybrid Driver Kit. 1set NEMA34 Closed Loop 8N. M Servo Motor 116mm 8A & HSS86 Hybrid Driver CNC Kit. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "rattmmotor" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.