EU 2- Nema34 8N. M Closed Loop Stepper Motor Servo Driver CNC Controller Kit 70V

M Closed Loop Stepper Motor Servo Driver CNC Controller Kit 70V DC. For CNC Router Engraving Milling Machine. Welcome European customers to our shop. 2-4 days to: Austria, France, Spain and Italy. 4-5 days to: Other Europe Countries. 2 x 3m extension wire. 100% Brand New & High Quality! HSS86 2-Phase Hybrid Stepper Servo Driver. HSS86 is 2 phase nema 34 series hybrid stepper servo driver. It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.

The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely.

The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo. 2.2.1 Stepper motor closed loop system, never lose step. 2.2.2 Improve motor output torque and working speed.

2.2.3 Automatic current adjustment based on load, lower temperature rising. 2.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.

2.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration. 2.2.6 No vibration from high speed to zero speed. 2.2.7 Drive nema 34 series closed loop stepper motor. 2.2.8 Pulses response frequency can reach 200KHZ.

2.2.9 16 kinds microsteps choice, highest 51200microsteps/rev. 2.2.10 Voltage range: AC2470V or DC30V100V. 2.2.11 Over-current, over-voltage and position ultra difference protection function.

Peak 8.0A (current change according to load). Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, laser phototypesetting, graph plotter, cnc machine, automatic assembly equipment and so on. Please check out your address carefully when processing order.

We are not responsible for wrong or undeliverable address. 1530 workings days to most other countries. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos, we will help you to solve any problems. We work hard to make sure EVERY CUSTOMER 100% satisfaction.

This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "powace1515" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.

Country/Region of Manufacture: China
Insulation Class: B
Servo Driver: HSS86 2-Phase Hybrid Stepper Servo Driver
Voltage: AC24~70V or DC30~100V
Phase: 2
Country//Region of Manufacture: China
Size: 86x86x116mm
Holding Torque: 8N.m
Brand: RATTM MOTOR
Type: Hybrid
Frequency: 0~200KHz
Current: 6.0A
Lead wire: 4pcs
Insulation resistance: 100MOhm(500V)