Nema Stepper Motor

Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder

Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder
Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder

Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder    Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder

Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder. Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on. Full closed loop control, motor encoder with 1000 line, close to 100% of the torque output. Segment set range is 2-256, fast response, high speed, light isolation fault alarm output interface ALM. 3 db 2 KHZ (typical), speed loop bandwidth 500 hz (typical), the position loop bandwidth 200 hz (typical).

RS232 serial port communication available to download or change parameters; Over-current, over-voltage, undervoltage, overheating, speeding, differential protection; Alarm clear input EN. Using better manufacturing technology, bring you a higher quality and more perfect experience. (2) Excellent service, a variety of models to meet your needs. Power LED does not light after power 1. Check the connection of the power line.

The voltage maybe too low 2. Check the connection of the motor with power, 2. Input voltage of the driver maybe too high or too low 3. The motor do not turn when the pulse input 1. Whether the pulse input of the driver is connected stably 2.

Whether the input way in the system configuration of the driver is pulse input 3. Whether the motor can be released 4.

Red light alarm after running a small angle 1. Whether the phase wire of the motor is correctly connected. If it is not correct, please refer to the motor phase and the corresponding phase sequence of the driver. In the driver configuration parameters, whether the number of motor encoder lines is consistent with the connected motor parameters.

If they are different, you need to reset them. Whether the pulse input speed is greater than the rated speed of the motor.

Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment.

Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns.

This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors".cnc" and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Just Motion Control
  • Model: 2HSS86H+86J18118EC-1000(φ73)
  • Country/Region of Manufacture: China
  • Holding Torque: 8.5NM
  • Application: Engraving Cutting machine
  • EAN: DoesNotApply

Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder    Easy Servo 8.5NM DSP Closed Loop Stepper Motor NEMA34 Drives Kit 6A 2ph Encoder