Nema Stepper Motor

Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New

Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New

Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New    Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New
Specification: Driver Model: HBS57 Voltage: DC24-60V Phase current: 5A/Pha (peak current) Subdivision: 2-256 subdivision Maximum 51200 steps / lap Processor: 32-bit DSP digital Pulse voltage: 5V-24V signal compatible Response frequency: up to 200KHz Pulse mode: single pulse (default) double pulse (software adjustable) Cooling method: natural cooling Motor Model: 57HBS30 Phase current: 4.0A/Pha Torque:3.6Nm Shaft diameter: 8mm Shaft length: 21mm Step angle;:1.8° Step angle accuracy: ±5% Surface temperature: 80? Or less (rated current) Motor line: 3m Encoder line: 3m Include: 1x HBS57 driver 1x 57HBS30 motor 1x 3m motor line 1x 3m encoder line. HBS57 adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC stepper motor. HBS57 is equipped with 42 and 57 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades.

The cost is only 50% of the AC stepper motor. Phase current: 5A/Pha (peak current).

Subdivision: 2-256 subdivision Maximum 51200 steps / lap. Pulse voltage: 5V-24V signal compatible. Response frequency: up to 200KHz.

Pulse mode: single pulse (default) double pulse (software adjustable). 1x HBS57 driver 1x 57HBS30 motor 1x 3m motor line 1x 3m encoder line. This item is in the category "Business & Industrie\Automation, Antriebe & Motoren\Elektromotoren\Schrittmotoren". The seller is "germannya2019" and is located in this country: DE. This item can be shipped worldwide.

  • Marke: Markenlos
  • Treibermodell: HBS57
  • Spannung: DC24-60V
  • Phasenstrom: 5A / Pha (Spitzenstrom)
  • Unterteilung: 2-256 Unterteilung Maximal 51200 Schritte / Runde
  • Prozessor: 32-Bit-DSP Digital
  • Impulsspannung: 5V-24V signalkompatibel
  • Ansprechfrequenz: bis zu 200 kHz
  • Kühlmethode: natürliche kühlung
  • Motormodell: 57HBS30
  • Drehmoment: 3.6N.m
  • Wellendurchmesser: 8mm
  • Schaftlänge: 21mm
  • Schrittwinkel: 1.8°
  • Schrittwinkelgenauigkeit: ± 5%
  • Oberflächentemperatur: 80 ℃ oder weniger (Nennstrom)
  • Motorleitung: 3m
  • Geberleitung: 3m
  • Phasenstrom2: 4.0A/Pha

Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New    Closed Loop Nema 23 Stepper Motor 3.6Nm CNC Driver HBS57 Stepper Motor New