3D Printer CNC Kit Controller Shield Nema 23 Stepper Motor Limit Switch TB6600
It is forbidden to contain flammable gas and conductive dust. Item Type: 3D Printer CNC Kit Material: Aluminum alloy Motor Model: 5628 Motor Shaft Diameter: Approx. 8mm / 0.3in, 6.35mm / 0.3in Input Voltage: DC9-40V Input Current: Recommended switching power supply 5A Output Current: Maximum 0.5-4.0A, 160W Power Consumption Breakdown: 1, 2 / A, 2 / B, 4, 8, 16, 32 Working Temperature: -10450? Humidity: No condensation, no water droplets Purpose: 3D printer. This kit contain complete supporting facilities, made of excellent aluminum alloy materials. This is a DIY kit with a lot of possibilities. This complete CNC kit is compatible with for GRBL(requires firmware installation). Possess all the basic electronic parts needed to set up CNC, laser engraving machine or robot. 3D printer CNC kit is light weight, possess good strength and good corrosion resistance. Can be used for 3D printer, a variety of accessories can meet your different needs. 1 x CNC Expansion Board. FDA declaration : Statement:The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. The Fingertip Pulse Oximeter is certified with the US FDA 510K No.
K070371, the CE & TUV of Eureope and it is on the Australian Register of Therapeutic Goods(ARTG) with the code 136606. The Powered Surgical Instrument / Speed 808 System is certified with the US FDA 510(k) Number:K132989. The Powered Surgical Instrument / Hair Remove Device is certified with the US FDA 510(k) Number:K180353.
The Powered Surgical Instrument / Hair Remove System is certified with the US FDA 510(k) Number:K141973. Massager, vacuum, light induced heating / Slimming Treatment Device is certified with the US FDA 510(k) Number:K161892. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "bestindustria" and is located in this country: CN.This item can be shipped worldwide.
- Brand: Unbranded
- Item Type: 3D Printer CNC Kit
- Material: Aluminum alloy
- Motor Model: 5628
- Motor Shaft Diameter: Approx. 8mm / 0.3in, 6.35mm / 0.3in
- Input Voltage: DC9-40V
- Input Current: Recommended switching power supply 5A
- Output Current: Maximum 0.5-4.0A, 160W
- Power Consumption Breakdown: 1, 2 / A, 2 / B, 4, 8, 16, 32
- Working Temperature: -10~450℃
- Storage Temperature: -40~70℃
- Humidity: No condensation, no water droplets
- Purpose: 3D printer