3Axis 12NM Closed Loop Stepper Motor Nema34 Servo Drive Encoder+CNC Controller

  
Package Included : 3 x Drive HBS860H 2 x Motor 86HBS85 1 x Motor 86HBS120 1 x Ring Transformer 900W 60VAC 1 x Offline Controller+1PC Handwheel CSV3.1-3 3 x Encoder Cable 3-meter 3 x Power Cable 3-meter Features : HBS860H uses advanced motor control DSP chip and vector loop control technology. Completely offline control, no need other computer to control for engraving machine. High control precision and reliable, low noise and little vibration. The pulse width can be adjusted. With English panel display, with handwheel, easy update your soft via USB flash drive. The accessories are completely for your system, convenient and cost-effective.

3Axis 12NM Closed Loop Stepper Motor Nema34 Servo Drive Encoder+CNC Controller. 1 x Ring Transformer 900W 60VAC.

1 x Offline Controller+1PC Handwheel CSV3.1-3. 3 x Encoder Cable 3-meter. 3 x Power Cable 3-meter. HBS860H uses advanced motor control DSP chip and vector loop control technology. 0-10V spindle control port with analog quantity(can be modified as PWM output).

24VDC power input, minimum Current is 0.5A. USB flash disk support for G code file input, no size limited of the G-code file. General MPG in the market.

Jog function for each axis (continuous, step, defined distance). Support the operation of quickly specify the running position. Support the origin and Limit share the same Input ports. The controller only support NPN type limited switch. DSP Closed loop stepper drive. Over voltage, over current, tracking error, overproof.

Support PUL/DIR and CW/CCW modes. Compatible 524V signal (Don't need a resistor). If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you.