2.3/3.6NM Close Loop Stepper Motor DSP Hybrid Servo Drive NEMA23 For CNC Plotter

Hybrid Servo Motor DSP Close Loop Stepper Drive NEMA23 2.2NM 3NM For CNC Plotter 1. Drive Specifications& Feature Model HBS57 Type 32Bit DSP Closed loop stepper drive maximum peak current 5A/Pha Impulse response frequency Max. 200KHz Micro-stepping driver 2-256 subdivision, Max 51200ppr Voltage DC24V-60V Protective function Over voltage, over current, tracking error, overproof Signal input Support PUL/DIR and CW/CCW modes (difference) Compatible 524V signal (Don't need a resistor) Advantage no step to lose, Low noise, little vibration and high efficiency, low heat Continuous overload Output an alarm signal.

2.3/3.6NM Close Loop Stepper Motor DSP Hybrid Servo Drive NEMA23 For CNC Plotter. Hybrid Servo Motor DSP Close Loop Stepper Drive NEMA23 2.3/3.6NM For CNC Plotter. HBS57 uses advanced motor control. When the motor is continuously overloaded, the driver will output an. In time, which has the same reliability as the AC servo system.

(1) No need for complicated parameter adjustments, it is more convenient to use. (2) No vibration when stopping at high speed, stable when stopped at zero speed.

(3) Very fast position response, especially suitable for short-distance fast start-stop situations. (4) 50% lower cost, higher torque and smaller mounting size compared to servo systems. It is suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, wire stripping machine, cutting machine, laser machine, plotter, CNC machine tool, automatic assembly equipment, electronic processing equipment, textile and garment equipment. It is especially effective in applications where users expect low noise and high speed. If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you.

This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "cncpart2018" and is located in this country: CN. This item can be shipped worldwide.

Motor Types: 57HBS36
Brand: ToAuTo
Chip: DSP
Control technology: Vector loop
Drive maximum peak current: 5A
Drive impulse response frequency: 200Khz
Micro-stepping driver: 200~51200ppr
Drive Voltage: DC24-60V
Protective function: Over voltage current, tracking error, overproof
Drive Signal input: Support PUL/DIR and CW/CCW modes,Compatible 5~24V
Continuous overload: Output an alarm signal
Type of cooling: Air-cooling
Application temperature: 0~50 degree centigrade
Humidity: 40-90%RH
Shake: 10~55Hz/0.15mm
Motor step angle: 1.8degree ± 5%
Motor phase: 2 phase
Motor rated voltage: 3.4V
Motor rated current: 4A
Motor Resistance: 0.85/1.15 ohm ±10%(At 20 degree centigrade)
Motor inductance: 2.0/3.6mH +/-20%/Phase
Motor hold torque: 2.3N.m
Motor insulation: B
Motor rotor inertia: 470/800g.cm2
Motor weight: 1.1kg/1.4kg
Power Supply Model: S-200-36
Power Supply Input: 90-132VAC 180-264VAC 47-63Hz
Power Supply DC output Power: 200W
Power Supply Output: 36VDC 5.9A