Nema Stepper Motor

2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23

2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23
2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23

2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23    2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23

Nema34/Nema23 2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V. 1 PCS 3M Encoder Cable.

1 PCS 200W 36V Power Supply. DSP Closed loop stepper drive. Over voltage, over current, tracking error, overproof. Support PUL/DIR and CW/CCW modes.

Compatible 524V signal (Don't need a resistor). No step to lose, Low noise, little vibration and high efficiency, low heat. Desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments... Especially for short-distance, short-time, fast start-stop and zero-speed stable stop. HBS860H+57HBS36 HBS860H+57HBS36 with Power Supply. HBS860H+86HBS45 HBS860H+86HBS45 with Power Supply. 1 PCS 300W transformer Power Supply.

HBS860H+86HBS85 HBS860H+86HBS85 with Power Supply. HBS860H+86HBS120 HBS860H+86HBS120 with Power Supply. Power LED does not light after power 1.

Check the connection of the power line. The voltage maybe too low 2.

Check the connection of the motor with power, 2. Input voltage of the driver maybe too high or too low 3. The motor do not turn when the pulse input 1. Whether the pulse input of the driver is connected stably 2.

Whether the input way in the system configuration of the driver is pulse input 3. Whether the motor can be released 4.

Red light alarm after running a small angle 1. Whether the phase wire of the motor is correctly connected. If it is not correct, please refer to the motor phase and the corresponding phase sequence of the driver. In the driver configuration parameters, whether the number of motor encoder lines is consistent with the connected motor parameters.

If they are different, you need to reset them. Whether the pulse input speed is greater than the rated speed of the motor. Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control.

We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "fasttobuy2012" and is located in this country: CN. This item can be shipped worldwide.

  • Flange: Nema34
  • torque: 12NM
  • voltage: AC60V
  • Model: HBS860H+86HBS120 with Power Supply
  • Country/Region of Manufacture: China
  • Brand: toauto


2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23    2.2NM -12NM DSP Closed Loop Stepper Drive+Motor+Power DC36V AC60V Nema34/Nema23