Nema Stepper Motor

12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling

12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling
12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling

12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling    12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling

Package Included : 3 x Drive HBS860H 1 x Motor 86HBS45 1 x Motor 86HBS85 1 x Motor 86HBS120 1 x Ring Transformer 900VA 60VAC 1 x 3.5 Inch Color Display Controller TC5530V 3 x Encoder Cable 3-meter 3 x Power Cable 3-meter Features : HBS860H uses advanced motor control DSP chip and vector loop control technology High accurate, highly reliable low noise and little vibration With 3.5 inch color screen, English panel display; Free chooses the default interface, with configuration function; Easy to operate and configurate. 12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling.

1 x Ring Transformer 900VA 60VAC. 1 x 3.5 Inch Color Display Controller TC5530V. 3 x Encoder Cable 3-meter. 3 x Power Cable 3-meter. HBS860H uses advanced motor control DSP chip and vector loop control technology.

High accurate, highly reliable low noise and little vibration. With 3.5 inch color screen, English panel display.

Free chooses the default interface, with configuration function. Easy to operate and configurate. 3.5 inch color screen, English display. 16 channel 24V(photoelectric isolating). 8 channel 24V(Single channel 500mA).

USB connection (Standard): Communicate with configuration software of master computer; upgrade; power supply. Automatic: Actually run, empty run, single step run, finally program.

Manual: High speed, point move, return program zero, manual output. External manual: External big button control motor forward and reverse, start, pause, alarm, emergency stop, etc.

Program editing: Edit, new, save. System parameters: Control, speed, factory value, user, password. IO: System, manual, real, set in, output.

Maximum 480 commands each program. 9000mm/min (pulse is 0.001mm).

Axis 1-3 (X, Y, Z). X, Y, Z axis can conduct linear interpolation. X, Y can do circular interpolation. DSP Closed loop stepper drive.

Over voltage, over current, tracking error, overproof. Support PUL/DIR and CW/CCW modes.

Compatible 524V signal (Don't need a resistor). If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "cncpart2018" and is located in this country: CN. This item can be shipped worldwide.

  • Brand: TOAUTO
  • MPN: 191673126934
  • Bundle Listing: Yes
  • Holding Torque: 4.5Nm+8.5Nm+12Nm
  • EAN: 191673126934


12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling    12Nm + 8.5Nm + 4.5Nm Closed Loop Stepper Motor Nema34 Controller for CNC Milling