12Nm 8.5Nm 4.5Nm 3Nm 2.2Nm Closed Loop Stepper Driver +Motor Kits NEMA34 NEMA23

  

12Nm 8.5Nm 4.5Nm 3Nm 2.2Nm Closed Loop Stepper Driver +Motor Kits NEMA34 NEMA23. 12Nm 8.5Nm 4.5Nm 3Nm 2.2Nm Closed Loop Stepper Drive+Motor Kit CNC NEMA34 NEMA23. Here is the link for. DSP Closed loop stepper drive. Over voltage, over current, tracking error, overproof.

Support PUL/DIR and CW/CCW modes. Compatible 524V signal (Don't need a resistor). No step to lose, Low noise, little vibration and high efficiency, low heat.

Nema23 Stepper Motor electric parameter. Nema34 Stepper Motor electric parameter. 3NM 4.5NM 8.5NM 12NM.

Desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments.. Especially for short-distance, short-time, fast start-stop and zero-speed stable stop. Power LED does not light after power 1. Check the connection of the power line.

The voltage maybe too low 2. Check the connection of the motor with power, 2.

Input voltage of the driver maybe too high or too low 3. The motor do not turn when the pulse input 1. Whether the pulse input of the driver is connected stably 2. Whether the input way in the system configuration of the driver is pulse input 3.

Whether the motor can be released 4. Red light alarm after running a small angle 1. Whether the phase wire of the motor is correctly connected. If it is not correct, please refer to the motor phase and the corresponding phase sequence of the driver.

In the driver configuration parameters, whether the number of motor encoder lines is consistent with the connected motor parameters. If they are different, you need to reset them. Whether the pulse input speed is greater than the rated speed of the motor. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls post a message again because sometimes our message system may block some emails. Instead of leaving negative/neutral feedback or opening a dispute. If you are satisfied with our service, pls.

Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. Like LCD screen, industrial burner accessories, printer accessories, instrument accessories, and other fields solutions, we supply Sumsung, LG, AUO, Xinje, Riello, Honeywell, Dungs, Mitsubishi, Siemens, Heidelberg machine parts and The international famous brand accessories etc. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors".cnc" and is located in this country: CN. This item can be shipped worldwide.

• Torque: 8.5Nm
• Flange: NEMA34
• Brand: SCC
• Country/Region of Manufacture: China
• Voltage: 20~80VAC/DC30-110V
• Holding Torque: 2.2/3/4.5/8.5/12 Nm
• Full Step Angle: 1.8° (200 Steps)
• Frequency: 200KHZ